-Resin sleeves are an effective way to create a fixing where there is a hollow void, such as for perforated bricks or blocks, or a more porous material-for example, blockwork.

-Resin is injected to fill the volume of the sleeve, and then forced through the small perforations when the fixing rod is inserted. This distributes the resin material evenly into the fixing cavity, forming a solid joint between the resin, the sleeve and the fixing.

-Chemical Resin Applicator Gun for EJOT Multifix VSF

-Ejot expansion anchors include SDF-KBs and through bolts.

-Expansion anchors are designed for use in hard solid base materials.

-Expansion anchors produce wedge forces and frictional forces in the base material.

-Torque controlled anchors are mainly used for group and single fastenings in the medium and high load ranges.

-Hole cleaning blow out pump.

-Kit case, including 6 mixers, 4 diamond brushes, 190mm blow pump, cartridge extrusion tool 410ml.

-Internally threaded sockets are an effective way to create a fixiing that can be removed and re-installed. For example, in concrete a hole is drilled then cleaned and resin is injected to fill the void. Then the socket is installed and allowed to fully cure, then a bolt can be installed into the socket.

-The Ejot chemical anchor range provides solutions for fixing to cracked and non cracked concrete where high performance is required.

-Ejot threaded stud with chamfer.

- Masonry drill bits