EJOT® SDF S 14A

Applications

• Installation of wood or metal components
• For non-supporting redundant systems according to EAD 330284
• Suitable for the structural fastening of gates, doors, windows, square timber

Properties

• Countersunk head
• Approved for all common building materials
• Reliable hold in problematic building material thanks to optimised expansion part
• Radial expansion for reliable hold
• Product identification through different sleeve colours
• Double safety lock against torsion for secure installation

Base materials
Approved for

• Cracked concrete
• Non-cracked concrete
• Solid masonry
• Hollow and perforated bricks
• Aerated concrete

Note
For planning, please observe approval ETA-15/0027. For bricks of unknown quality, the load-bearing capacity must be determined through pull-out tests on the structure. When used in concrete, a silicone lubricant paste (e.g. FUCHS CHEMPLEX SI-LK 2) and the use of an impact screwdriver with particularly high torque are recommended. 

Technical specifications

Characteristic values

• Diameter: 14 mm
• Drive: Hexalobular drive TX40
• Drill hole depth ≥ t: 80 mm
• Embedment depth ≥ h_v: 70 mm 

Admissible loads 

• Tensile load N_Rk,pin concrete > C12/15: 3.37 kN
• Brick Mz 20-1,8, NF: 1.57 kN
• Solid lime sand brick KS, 2 DF 20-2,0: 1.71 kN
• Solid lime sand brick KS, 8 DF 20-1,8: 2.00 kN
• Solid brick V, 3 DF: 0.86 kN
• Vertically perforated brick HLz, 2 DF 28-1.2: 0.57 kN
• Perforated sand-lime brick KSL, 8 DF 16-1.4: 0.71 kN
• Cavity block tile made of lightweight concrete Hbl, 12 DF: 0.71 kN
• Aerated concrete f_CK ≥ 2 N/ mm²: 0.43 kN
• Aerated concrete f_CK ≥ 4 N/ mm²: 0.89 kN
• Aerated concrete f_CK ≥ 6 N/ mm²: 1.60 kN
• Transverse load V_Rk,s
  • Steel screw (γMs = 1.25): 17.4 kN 
  • Stainless steel screw (γMs = 1.56): 16.2 kN
• Bending moment M_Rk,s
  • Steel screw (γMs = 1.25): 50.0 Nm
  • Stainless steel screw (γMs = 1.56): 46.7 Nm

 *applies to temperature range 30-50 ^oC / 50-80 ^oC