General Fabrications
Please click her to increase the view
  • One-sided accessibility
  • Removable and high quality screw joint, without part preparations, such as pre-drilling or
  • No tolerance problems with clearance or threaded holes
  • No material waste and no swarf
  • Use with various sheet surfaces
  • High loosening torque and vibration resistance, no need for additional safety elements
  • Easy removal and recycling
  • Repeat assemblies also possible with metric screws

High strength sheet metal joints

Especially in the fast automotive industry, where the used components have to withstand high stress, the demands on fastening technology are high. For example in the car body construction the composite design is on the increase where different materials have to be fastened securely and lastingly. In addition to one-sided accessibility, the removability of the fastener is also very important, especially with regard to recyclability. These complex conditions are a case for the use of the EJOT FDS® screw, which fastens thin sheet metals made of steel and aluminium without the need for a pilot hole and in excellent quality. Work steps such as pre-drilling or pre-punching are no longer necessary. Due to the increased thread engagement in the formed draught a high-strength screw joint is created - without the undesired metal chipping. The screw joint is able to transfer high pull-out as well as shearing forces.

Fastening tool selection

A higher screwdriver speed and a defined end load is needed for flow drilling, thread-forming and tightening of the screw require a high torque. The suitable screw drivers have been developed in cooperation by a EJOT®  and different manufacturers. For exact specification of the suitable tools the FDS® product management will gladly assist you, for determination of the selection criteria we can also carry-out assembly tests in the EJOT® APPLITEC laboratory.

FDS® WN 21 Head Styles and Drives

WN2141 round washer head with cross recess Z (or H)
WN2142 pan head with cross recess Z (or H)
WN2143 flat countersunk head with cross recess Z (or H)
WN2147 hexagon head with washer
WN2151 round washer head with TORX®
WN2152 pan head with TORX®
WN2153 oval countersunk head with TORX®

For detailed information, please refer to the EJOT company standard.
You can download these in our service area "CAD & more".
Click here to register: "CAD & more" 

Further information for you

Top of pagePrint page

EJOT® - The Quality Connection - This statement captures the Group's ethos. On one hand, it reflects the uncompromising efforts made to achieve the highest possible levels of product quality. On the other hand, it underlines that, technical standards aside, the human aspect both inside and outside the company are just as important. Just one reason they call EJOT® the quality connection.