New Products
for Building & Construction

New EJOT® HTK 2G 75mm tube-washer

You are here: Home - New EJOT® HTK 2G 75mm tube-washer

EJOT ® The quality connection

New to our Flat Roofing & Membrane Systems product range, EJOT UK has developed a 75 mm diameter tube-washer specifically for part-adhered flat roofing installations.

The new HTK-2G-75 meets SPRA guidelines for bonded/mechanical hybrid installations for securing insulation back into either ply or profiled steel decks where the surface membrane layer is to be adhered.
EJOT’s technical sales engineers will advise on the correct fixing centres in relation to wind-load calculations, while the tube-washer and threaded fastener not only address cold-bridging concerns, just as the HTK-2G-50 does for mechanically fixed systems, the telescopic design provides resistance to imposed loads. With the insulation and membrane permanently secured using EJOT’s hybrid solution, the job is completed by folding and heat welding the laps.

210pixel-EJOT-HTK-75-Sidebar.png

Download the HTK 2G 75 sales leaflet

This A4 leaflet summarises the HTK-2G-75mm tubewasher and its application benefits. Please use the link below to download.

Back to New ProductsBack to Building & Construction

Top of pagePrint page

EJOT® - The Quality Connection - This statement captures the Group's ethos. On one hand, it reflects the uncompromising efforts made to achieve the highest possible levels of product quality. On the other hand, it underlines that, technical standards aside, the human aspect both inside and outside the company are just as important. Just one reason they call EJOT® the quality connection.