SDF-S plus 8UB

Specification

  • Applications

    • Fastening of brick slip systems
    • Brick slip system anchors for concrete and masonry
    • Approved for concrete, solid and perforated masonry
  • Properties

    • Approved for concrete, solid and perforated masonry
    • Torsion-proof anchor tube
    • Anchor tube with small countersunk head for unobtrusive installation in the joint
    • Universal expansion zone for safe anchoring
    • High loads
    • Anchor with increased bending moment
    • Premounted screw for quick installation
  • Technical specifications

    • Anchor diameter: 8 mm
    • Diameter of countersunk head: 12 mm
    • Drill hole depth h1 ≥: 80 mm
    • Embedment depth hef ≥:  70 mm
    • Screw drive: TORX T30
    • German DIBt approval: Z-21.2-589

    Characteristic loads:


    Building material class A:

    • Normal weight concrete ≥ C 12/15 acc. to EN 206-1: 1.0 kN
    • Pre-cast concrete panel ≥ B15: 0.25 kN

    Building material class B:

    • Clay bricks(≥ Mz 12) acc. to DIN 105: 0.4 kN
    • Solid lime sandstone (≥ KS 12) acc. to DIN EN 106: 0.4 kN
    • Solid masonry of lightweight concrete (V) acc. to DIN 18152: 0.2 kN

    Building material class C:

    • Vertically perforated clay bricks Hlz) acc. to DIN 105: *
    • Vertical coring reference brick(Hlz) acc. to ÖNORM B 6124: 0.75 kN
    • Sand-lime perforated bricks(≥ KSL 6) acc. to DIN EN 106: 0.25 kN
    • Lightweight concrete hollow blocks(≥ HbL 2) acc. to DIN 18151: 0.15 kN

    Building material class D:

    • Lightweight aggregate concrete acc. to TGL: 0.3 kN

    *According to approval to be determined through pull-out testing at the building.

    The design loads given are in accordance with the German building code. National safety factors are already incorporated. Please observe the approval.

     

This product is currently only available through ETICS providers
Please email customerservice@ejot.co.uk or call 01977 687040 for further information

Anchor diameter mm Length mm Substrate category Embedment mm Screw-in-/hammer-inanchor Unit Article Number Orderidentifier
8.0
100.0 A 70.0 screw-in-anchor 100 8786100460 SDF-S plus 8UB x 100 V
8.0
120.0 A 70.0 screw-in-anchor 100 8786120460 SDF-S plus 8UB x 120 V
8.0
140.0 A 70.0 screw-in-anchor 100 8786140460 SDF-S plus 8UB x 140 V
8.0
160.0 A 70.0 screw-in-anchor 100 8786160460 SDF-S plus 8UB x 160 V
8.0
180.0 A 70.0 screw-in-anchor 100 8786180460 SDF-S plus 8UB x 180 V
8.0
200.0 A 70.0 screw-in-anchor 100 8786200460 SDF-S plus 8UB x 200 V
8.0
220.0 A 70.0 screw-in-anchor 100 8786220460 SDF-S plus 8UB x 220 V