Self-Drilling Fasteners

Super-SAPHIR^®

- Stainless steel bi-met stitcher.

- Low profile dome head.

- Drilling capacity 0.7mm + 0.7mm to 1.0mm + 1.0mm.

Super-SAPHIR^®

- Stainless steel bi-met.

- Drilling capacity 0.7mm to 1.0mm.

SAPHIR^®

- Carbon steel stitcher.

- Organic corrosion resistant finish.

- Drilling capacity 0.7mm + 0.7mm to 1.0mm + 1.0mm.

- Carbon steel wing driller.

- Organic corrosion resistant finish.

- Drilling capacity 4.0mm to 10.0mm.

- Carbon steel wing driller.

- Organic corrosion resistant finish.

- Drilling capacity 1.5mm to 3.0mm.

SAPHIR^®

- Carbon Steel.

- Organic corrosion resistant finish.

- Drilling capacity 1.2mm to 3.0mm.

Super-SAPHIR^®

- Stainless steel bi-met.

- Serrations underneath flange.

- Drilling capacity 1.6mm to 4.0mm.

Super-SAPHIR^®

NEW EJOfast JF3 fastener

- Stainless steel bi-met.

- Drilling capacity 0.5mm + 0.5mm to 1.0mm + 1.0mm.

SAPHIR^®

- Self-Drilling Medium Section High Thread Fastener

- Steel Profiled insulated sandwich panels to Timber with 45-50mm embedment

Forms floating and fixed points on substructures of rear-ventilated facades.

Fastening pre-drilled stainless steel or aluminium wall brackets to aluminium support profiles. 

-Stainless Steel A4 Bi-Met Self drilling fasteners

-Steel Sections from 4.0mm to 12mm in thickness.

-A2 (304) Fully stainless steel self drilling fixing for aluminium.

- Milling ribs under countersunk head.

-A2 (304) Fully stainless steel self drilling fixing for aluminium.

-Countersunk head with flange.

-Very flat head.

Side lap stitching of profiled steel sheet

Side lap stitching of profiled aluminium sheet

For fixing profiled steel sheet to cassette system walls

For fixing profiled aluminium sheet to cassette system walls

-A2(302) Austenitic stainless steel with a case hardened carbon steel drill point bi-met.

-Wing driller for fixing timber or sheathing boards back to steel sections.

-Stainless steel A4 Bi-Met Self drilling fastener.

-Steel sections from 1.2 to 6.0nn in thickness.

-Carbon steel with organic corrosion resistant finish

-Drilling capacity 4.0mm to 18.0mm

Forms floating and fixed points on substructures of rear-ventilated facades.

Fastening pre-drilled stainless steel or aluminium wall brackets to aluminium support profiles.

Super-SAPHIR^®

- Stainless steel bi-met.

- High thread.

- Drilling capacity 1.2mm to 6.0mm.

Super-SAPHIR^®

- Stainless steel bi-met.

- High thread.

- Drilling capacity 4.0mm to 12.0mm.

- Stainless steel bi-met stitcher.

- Drilling capacity 0.5mm + 0.4mm to 1.0mm + 1.0mm.

Super-SAPHIR^®

- Stainless steel bi-met.

- Low profile dome head.

- Drilling capacity 1.2mm to 6.0mm.

-Carbon steel with organic corrosion resistant finish.

-High thread fixing.

Drilling capacity 4.0mm to 12.0mm.

-Carbon steel with organic corrosion resistant finish.

-High threaded fixing.

-Drilling capacity 4.0mm to 12.0mm.

-Carbon steel with organic corrosion resistant finish.

-High threaded fixing.

-Drilling capacity 4.0mm-12.0mm.

-A2 Austenitic Stainless steel Bi-Met fastener.

-Drilling capacity 4.0mm to 18.0mm.

-Assembled with integral Nylon head and aluminium/EPDM vulcanised sealing washer.