Every facet of façade installation, safely secured


Modern building envelope design relies heavily on rear ventilated façade (RVF) and rainscreen systems to combine elevated aesthetics, structural durability, and energy efficiency. By maintaining an engineered cavity between the outer cladding and the insulation layer, these systems promote continuous natural ventilation, preventing moisture accumulation and optimising thermal performance.

However, the structural safety, weather tightness, and long-term efficiency of any rainscreen installation depend on selecting the correct fastening technology. Fasteners secure every layer, from the underlying primary framework to the exterior decorative panels, and must reliably endure dynamic wind suction, high dead loads, thermal expansion, and harsh environmental exposure throughout the building’s operational lifespan.

To meet these demands, EJOT UK provides a comprehensive portfolio of performance-proven, fully tested fastening solutions designed for every stage of the façade build-up. From high-capacity self-drilling screws and heavy-duty structural anchors to specialised insulation fixings, cavity fire barrier fasteners, and discreet low-profile panel screws, EJOT delivers an end-to-end product range tailored to all backing substrates and cladding materials. Engineered to meet the most rigorous safety and building regulation standards, these fixings offer exceptional mechanical strength, streamlined assembly, and superior corrosion resistance.

Beyond manufacturing excellence, EJOT delivers unrivalled project support to specifiers, structural engineers, and contractors. Customers benefit from dedicated technical expertise at every phase of design and construction, including expert calculations, bespoke advice, on-site pull-out testing by CFA-approved engineers, and advanced testing capabilities at the UK Applitec Centre. Whether you are assembling light steel framing, securing helping-hand brackets, or installing delicate exterior panels, EJOT provides total structural confidence from a single trusted partner.

Technical Support: Talk to our team

Our highly experienced team offers a wealth of technical support and specialist guidance, ensuring the right results are achieved every time.


Contact our Team

Buy Online & Save Time

Our webshop has over 3,000 fastening products available. Registration is straightforward and creates a personalised online pricing structure and flexible purchasing options.


Register Here

Backing Structure Framing Numbered - 640 x 377.png

Backing Structure Framing

The backing structure, whether light steel framing (LSF) or timber, provides the primary framework for the entire façade build-up. EJOT provides high-performance self-drilling fasteners and ETA-compliant anchors designed to secure base and head tracks, join studs, and install sheathing boards. Engineered for material thicknesses up to 18mm, these fixings deliver consistent mechanical strength, ensuring a precise, load bearing backing structure that prevents structural movement or joint failure.


View Range

Profiles & Brackets to Substrate via Intermediate Layer Numbered - 640 x 377.png

Profiles & Brackets to Substrate via Intermediate Layer

Connecting sub-frame brackets, such as helping-hand systems, through intermediate sheathing boards into steel, timber, masonry, or concrete demands accredited structural integrity. EJOT offers market-leading façade anchors, through-bolts, bi-metallic screws, and chemical resin systems tailored to specific substrates. Notably, EJOT holds the world's first ETA confirming fastener performance when fixing brackets through sheathing boards into light steel framing as thin as 1.2mm, verifying crucial shear load performance.


View Range

Support Frame Fastening Numbered - 640 x 377.png

Support Frame Fastening

Assembling support frames requires flexible fixings capable of handling dynamic structural loads and thermal movement. Ambient temperature changes cause aluminium and steel support profiles to expand and contract; improperly fixed connections can lead to panel warping or surface distortion. EJOT’s range includes specialised A2 and A4 stainless steel self-drilling screws, alongside the innovative VARIO system, which utilises a buffer zone to form reliable fixed and sliding points without over-clamping.


View Range

Fastening for Insulation & Fire Barrier Systems Numbered - 640 x 377.png

Fastening for Insulation & Fire Barrier Systems

Ensuring thermal performance and fire safety requires reliable securement of insulation slabs and cavity barriers within the ventilated cavity. EJOT manufactures specialised two-part polyethylene anchors, stainless steel centre-fix washers, and bi-metallic fasteners compatible with both rigid boards and mineral wool. Designed for high-temperature stability and durability, these solutions maintain the placement of insulation and cavity fire barriers across various backing substrates without creating thermal bridges.


View Range

Fastening Exterior Façade Panels & Systems Numbered - 640 x 377.png

Fastening Exterior Façade Panels & Systems

The final aesthetic layer requires fasteners that combine high shear strength with refined visual integration. EJOT provides A2 and A4 stainless steel low-profile dome and pan-head fasteners engineered to secure high-pressure laminates, aluminium, and composite panels to metal or timber substructures. Featuring advanced stand-off technologies like the LT-TD system and premium in-house powder coating capabilities, EJOT fasteners accommodate thermal movement while seamlessly matching panel aesthetics.


View Range

RVF CROSSFIX - 640 x 377.png

CROSSFIX® - The Complete System

The EJOT CROSSFIX® system is the market’s first universal A2/A4 stainless steel substructure for rear ventilated façades. By replacing traditional aluminium bracketry, CROSSFIX® significantly reduces thermal bridging while delivering superior fire safety and structural load capacity. Its innovative non-handed bracket design accommodates both fixed and sliding points, streamlining installation across diverse substrates. Engineered for complete ETA compliance, CROSSFIX® offers a durable, non-combustible, and energy-efficient framing solution supported by EJOT’s technical expertise.


Learn more

NEMM Best Practice Guidance Image - 640 x 377.png

Local Support, Global Expertise

Unrivalled Project Support
Partner with EJOT UK for end-to-end rear ventilated facade support. From tailored specification guidance to on-site testing, our technical experts ensure seamless execution, complete compliance, and total peace of mind.


Request expert support today

Going Beyond Compliance - 640 x 377.png

Going Beyond Compliance

No other fastener manufacturer invests as much in ETAs as EJOT. 

Click the link below to read our series of articles to better understand why EJOT values ETAs so highly...


Read more

NEMM Downloads Image - 640 x 377.png

Rainscreen & Façade Guidebook

Master rainscreen and façade installation with expert guidance from EJOT UK. Explore key structural best practices, from managing thermal expansion to selecting approved anchors, to ensure long-lasting structural safety.


Explore the Guidebook