EJOT® H1 eco

Specification

  • Applications

    • Fastening of insulation boards
    • Universal hammer-in anchor
    • Approved for concrete, solid and perforated masonry
  • Properties

    • Solid steel nail (break-proof)
    • Low profile washer face
    • Plastic injection element to reduce thermal transmission
    • Can be used with an additional spreader washer
    • Short embedment depth, reduced drilling
    • High loads for your security
    • Economic anchor usage
    • Premounted nail for quick installation
  • Technical specifications

    Anchor diameter: 8 mm
    Washer diameter: 60 mm
    Drill hole depth h1 >: 35 mm
    Embedment depth hef >: 25 mm
    Point thermal transmission χ: 0.001 W/K
    Use categories acc. to ETA: A, B, C, D, E
    European Technical Approval: ETA-11/0192

This product is currently only available through ETICS providers
Please email customerservice@ejot.co.uk or call 01977 687040 for further information

Washer diameter mm Anchor diameter mm Length mm Substrate category Unit Article Number Orderidentifier
60.0
8.0 95.0 D 100 8746095400 EJOT H1 eco 095
60.0
8.0 115.0 D 100 8746115400 EJOT H1 eco 115
60.0
8.0 135.0 D 100 8746135400 EJOT H1 eco 135
60.0
8.0 155.0 D 100 8746155400 EJOT H1 eco 155
60.0
8.0 175.0 D 100 8746175400 EJOT H1 eco 175
60.0
8.0 195.0 D 100 8746195400 EJOT H1 eco 195
60.0
8.0 215.0 D 100 8746215400 EJOT H1 eco 215
60.0
8.0 235.0 D 100 8746235400 EJOT H1 eco 235
60.0
8.0 255.0 D 100 8746255400 EJOT H1 eco 255
60.0
8.0 275.0 D 100 8746275400 EJOT H1 eco 275
60.0
8.0 295.0 D 100 8746295400 EJOT H1 eco 295