ejotherm® STR H A2

Specification

  • Applications

    Screw fastener for the corrosion resistant fixing of ETICS

     

    • For cement particle boards, wooden substrates and metal Frame
    • For a corrsion-free fastening
    • For countersunk and surface fixed installation
    • For homogeneous surfaces
  • Properties

    • Fastener, consistent of a A2 stainless screw with hardened drill point, included washer and an EPS sealing plug
    • EJOT STR principle with ejotherm STR cap for homogeneous surfaces and even rendering - quick and easy without milling dust
    • Countersunk installation in mineral wool insulation boards WAP-zg (type WV) in combination with ejotherm VT 2G
    • No drilling necassary
    • Surface fixed installation with ejotherm STR plug
    • Permanent contact pressure
    • 100% Setting control: the countersunk installation of the washer indicates safe anchorage
  • Technical specifications

    • Screw diameter: 6 mm
    • Washer diameter: 60 mm
    • Screw-in depth: 30 - 40 mm
    • Screw drive: TORX T25
    • Point thermal transmission χ:
      countersunk installation in timber substrates: 0.001 W/K
      surface fixed installation in timber substrates: 0.002 W/K

    Tensile strength from the substrate:

    • Solid wood, laminated timber,laminated beams or cross laminated timber made of softwood
          Minimum screw-in depth: 35 mm oder 24 mm (embedment)
          Designed load Fax,90,Rd: 0.94kN
    • OSB boards
          Minimum screw-in depth: 15 mm (thread engagement)
          Designed load Fax,90,Rd: 0.56kN
    • Synthetic resin bonded chipboard
          Minimum screw-in depth: 16 mm (thread engagement)
          Designed load Fax,90,Rd: 0.56kN
    • Cement particle board
          Minimum embedment depth: 16 mm (thread engagement)
          Designed load Fax,90,Rd: 0.56kN

This product is currently only available through ETICS providers
Please email customerservice@ejot.co.uk or call 01977 687040 for further information

Washer diameter mm Length mm Construction way Screw-in-/hammer-inanchor Unit Article Number Orderidentifier
60.0
80.0 countersank and surface fixed installation screw-in-anchor 100 8711080666 ejotherm STR H A2 80
60.0
100.0 countersank and surface fixed installation screw-in-anchor 100 8711100666 ejotherm STR H A2 100
60.0
120.0 countersank and surface fixed installation screw-in-anchor 100 8711120666 ejotherm STR H A2 120
60.0
140.0 countersank and surface fixed installation screw-in-anchor 100 8711140666 ejotherm STR H A2 140
60.0
160.0 countersank and surface fixed installation screw-in-anchor 100 8711160666 ejotherm STR H A2 160
60.0
180.0 countersank and surface fixed installation screw-in-anchor 100 8711180666 ejotherm STR H A2 180
60.0
200.0 countersank and surface fixed installation screw-in-anchor 100 8711200666 ejotherm STR H A2 200
60.0
220.0 countersank and surface fixed installation screw-in-anchor 100 8711220666 ejotherm STR H A2 220