Anchoring

-High performance double cone expansion anchor.

-ETA approved for cracked and non cracked concrete

-Hex Nut

-Size Range M6-M16

-Self undercutting

-Undercut anchor with the need for special tools

-Self Undercutting Anchor

-ETA approved for cracked and non cracked concrete

-Stainless steel A4

-Size range M6 to M16

-Hex nut 

-Pre-install self undercutting anchor

-ETA approved for cracked and non-cracked concrete

-Carbon steel zinc plated

-Size Range M6-M16

-Hex nut

-Stainless Steel A4

-High performance double cone expansion anchor

-Hex bolt head

-Size M6 to M16

-Stainless steel A4

-High performance double cone expansion anchor

-Hex nut

-Size range M6 to M16

-Carbon steel zinc plated

-ETA approved for cracked and non cracked concrete

-Countersunk head

-Thread size M6 to M16.

-Stainless steel A4

-High performance double cone expansion anchor

-Countersunk head

-Size M8 to M12

-Heavy duty expansion anchor

-Hex nut and domed washer

-Stainless steel A4

-Size range M6-M16

-Carbon steel zinc plated

-ETA approved for cracked and non cracked concrete

-Hex bolt head

-Thread size M6 to M16

-Stainless steel A4

-Hex bolt head

-Thread size M6 to M16

-Special lengths available

-Carbon steel zinc plated

-High performance double cone expansion anchor

-Hex bolt head

-Size range M6 to M16

-Carbon steel zinc plated

-Hex nut

-Thread size M6 to M16

-Special lengths available

- Special Direct System drill bits.

- Used for drilling masonry.

-Hole cleaning wire brush.

- A4 stainless steel.

- Available in zinc plated 8.8 grade steel.

- For embedment in concrete and solid brick.

- Different metric sizes from M-8 to M-16.

-Mixer Nozzle for Ejot Multifix VSF

-Ejot expansion anchors include SDF-KB's and through bolts.

-Expansion anchors are designed for use in hard, solid base materials.

-Expansion anchors produce wedge forces and frictional forces in the base material.

-Torque controlled anchors are mainly used for group and single fastenings in the medium and high load ranges.

- For cleaning drill holes in concrete and solid brick masonry.

- Two-component injection chemical anchor based on vinylester resin without styrene and low odour.

- Fast cure.

- Fire rated.

- Low odour, styrene free.

-Nylon perforated sleeves to be used in hollow substrates.

-Chemical Resin Applicator Gun for EJOT Multifix VSF

- Kit case:

- Including 6 mixers,

- 4 diamond brushes,

- 190mm blow pump,

- Cartridge extrusion tool 410ml.

- Heavy duty applicator gun for use with vinylester resin.

- Used to apply Ejot Multifix VSF.

-Internally threaded sockets are an effective way to create a fixiing that can be removed and re-installed. For example, in concrete a hole is drilled then cleaned and resin is injected to fill the void. Then the socket is installed and allowed to fully cure, then a bolt can be installed into the socket.

-Resin sleeves are an effective way to create a fixing where there is a hollow void, such as for perforated bricks or blocks, or a more porous material-for example, blockwork.

-Resin is injected to fill the volume of the sleeve, and then forced through the small perforations when the fixing rod is inserted. This distributes the resin material evenly into the fixing cavity, forming a solid joint between the resin, the sleeve and the fixing.