EVO PT® The Evolution of self-tapping into plastic materials Self-tapping fastener for thermoplastics Optimised locating point Depth independent installation torque Support with complete CAE based designing Excellent process safety Standardisation potential
DELTA PT® High load capacity direct fastening into plastic material High load capacity direct fastening into plastic material High fatigue strength Safety due to high tensile and torsion strength as well as vibration resistance A wide range of possible tightening torques Easy design engineering with the EJOT® DELTA CALC prognosis programme Lightweight design: use of shorter fasteners and/or smaller diameters possible under certain conditions
DELTA PT® DS The self-tapping fastener for thermoset. Safe and reliable direct assembly into thermosets Saving potential through standardisation – one type of screw for thermoplastic and thermoset Easy assembly due to good application of the screw Smaller hole depth possible compared to screws with a milled cutting edge Larger flank coverage at the same insertion depth compared to screws with a milled cutting edge Enables weight reduction goals to be realised in all kinds of components and assemblies
DELTA PT® P The light weight screw for soft thermoplastics. Thermoplastic screw with 50% fibreglass content offering the same reliability as metal screws Lightweight for significant weight savings compared to screws made of steel Secure and reliable direct assembly into most thermoplastics Reliable clamp load retention under thermal stress No risk of corrosion and non-magnetic Recyclable Coefficient of expansion adapted to plastic
PT® Approved direct fastening in plastic Special screw for easy and reliable fastening into thermoplastics Enables direct assembly to make thin walled and flat designs a reality Saves time and work steps Minimised radial stress enables thin-walled designs High load-carrying capacity due to large thread bearing depth Good self-locking of the screw thread
CELL PT® Thread-forming screw for cellular foamed thermoplastics Specialist screw for direct fastening into cellular foamed thermoplastics Easy positing and fastening using standard screwdrivers Higher stripping torque through blind hole fastening Standard lengths: from approx. 3.5 times nominal diameter Standard diameter: from 3.5 to 6.5 mm (more on request) High vibration fatigue strength Safety assured due to high tensile, torsional and vibration resistance Repeat assembly possible Also available in plastic PPA GF50
FLOWpoint DELTA PT® Self-tapping fastener for carbon fibre reinforced plastics without pilot hole Flow-drill fastening for materials without a pilot hole High quality threaded joint without part preparation Applicable for many varieties of CFRP (carbon-fibre reinforced plastics) Easy disassembly and reassembly Available in A2/A4 stainless steel, steel, aluminium and titanium Facilitates hybrid joining, such as aluminium to CFRP
DELTAsert® Self-tapping for thermoplastics and thermosets. Innovative aluminium insert that provides a stable fastening point in plastic Easy and reliable direct assembly; no complex setting procedure necessary Low weight due to the use of aluminium instead of brass High pull-out force due to large flank coverage Very high loosening torque due to self-tapping DELTA PT® thread Multiple uses, in thermoplastic as well as thermoset materials Alternative insert also available in plastic