- Steel brackets to concrete or solid brick/block.
SDF-S plus 8UB
ETICS anchors UK
Brick slip system anchor
- Fastening of brick slip systems - Brick slip system anchors for concrete and masonry - Approved for concrete, solid and perforated masonry (A, B, C, D)
Insulation anchor DDA
Insulation support anchors / Washers
Ceiling insulation anchor
- One piece hammer set Polyamide drive-in anchor with 25mm washer face.
- Recommended substrate Concrete, can be used with blockwork and brickwork.
FBS R 6.3
Flat Roofing Fasteners
To secure roofing membranes on concrete
- Carbon steel.
- Button head (low profile).
- 5mm pilot hole.
- For timber back to masonry.
FPS E 8.0
Flat Roofing Fasteners
Roofing membrane on aerated concrete
- A4 stainless steel.
- Self-tapping Masonry fixing.
- No pilot hole required into aerated concrete.
- Can be used in conjunction with the ECOtec tube washer.
BS R 6.3
Self-Tapping Masonry Screws
concrete, concrete blockwork and brick
- Carbon steel.
- 5mm pilot hole.
- Steel brackets back to concrete or solid brick/block.
SDS plus Hammer Drill Bit
Accessories
Masonry, concrete, natural stone
- Special Direct System drill bits.
- Used for drilling masonry.
Soffit insulation screw DDS
Insulation support anchors / Washers
Insulation screw for direct installation into concrete
- Carbon steel.
- Organic corrosion resistant finish.
- For fixing insulation and acoustic boards to concrete soffits.
Insulation support anchor DH -2 Piece- Two Part Anchor
Insulation support anchors / Washers
For rear ventilated facade insulation
- Two piece polyethylene hammer set fix.
- For fixing soft insulating materials in rain screen applications to blockwork, brickwork and concrete.
TRIO TO
Insulation support anchors / Washers
- High density polyethylene sleeve.
- Steel pin with plastic head.
- For holding insulation back to masonry including aerated block.
TRIO TT
Insulation support anchors / Washers
- High density polyethylene sleeve.
- Plastic pin.
- For holding insulation back to masonry including aerated block.
SDP-KB-10G
Facade Anchors
Substrate: aerated concrete
- For fastening steel or aluminium into areated concrete.
- Stainless steel fastener.
SDF KB 10V
Facade Anchors
Substrate:solid brick
- Carbon steel or stainless steel.
- 10mm pilot hole.
- 13mm A/F and Torx 40.
SDF S 10V
Facade Anchors
Substrate:solid brick
- Carbon steel
- 10mm pilot hole.
- Countersunk.
- Torx 40.
SDF S 10H
Facade Anchors
Substrate: hollow brick
Carbon steel or stainless steel.
- 10mm pilot hole. Countersunk.
- Torx 40.
SDF KB 10H
Facade Anchors
Substrate: hollow brick
- Stainless steel or carbon steel.
- 10mm pilot hole. Hexagon head 13mm A/F and Torx 40.
DMH 8
Insulation support anchors / Washers
To fasten soft and hard material
- Stainless steel or carbon steel.
- Firewall and rain screen insulation support anchors.